1- CIFA 31m (2017/2018)
(1) Used CIFA K31L HP1608 EC (31m), Concrete Boom Pump
CIFA – 31m concrete boom pump 2017 model year, fully mounted and tested on 2018* Kenworth truck
31 Meter, 5-section Z-boom s/n: 170 pump hours
- 5”M full size pipe entire boom length, twin wall, hardened (CIFA Long Life Pipes double wall Valme)
- Outriggers – Fully hydraulic, for quick set-up, ease of pump placement, and increased stability, fully automatic load holding valve for increased safety
- Front telescopic folding “X” style, Rear "H” style
- High capacity hopper – (600 l)
- Load sensing proportional boom control valve– for control of multiple boom simultaneously
Pump Specifications:
- Modular S-Valve – ( F9 S-Valve style)
- Automatic ring-wear adjustment – eliminates frequent manual adjustment. Wear plate is serviced and replaced through top of hopper
- Stroke adjustment for every pump cycle – automatic and constant (volume control)
- Concrete cylinders 9” x 79” (230mm x 2000mm), hard chromed barrels, (9” pistons)
- Rexroth double main hydraulic pumps
- PTO installed in-line of drive lines for maximum pumping power
HP1608 EC – (High Pressure) hydraulic system
- Pump Performance: CIFA- closed loop circuit
- theoretical output: rod side: (215 yard/hour) (160 meter/hour)
- pressure: rod side: (1,160 PSI) (80 bar)
- strokes per minute: rod side: 31
Boom Specifications:
- 30.5m (100’-1”) vertical, 26.2m (86’-0”) horizontal
- 5.7m (18’-9”) minimum unfolding height
- Section articulation: 1stsection moves 90o, 2nd section moves 180o, 3rd section moves 240o, 4th section moves 180o, (5th section moves CONTINUOUS VIA WORM GEAR DRIVE)
5-Section boom system: Zee Fold
- Slewing Range: 370 degrees using (2) hydraulically driven gear motors with fully automatic spring applied brake, also featuring a large diameter Rotec type bearing for increased boom stability and wear resistance
- End-Hose: 3 Meter (10’-0”) straight 5” rubber hose, 1-fitting, with safety strap
Truck Specifications: (not inclusive) 1-front steer axle, 2 rear drives (2018* yr), conventional cab,
VIN: 1NKZL40X3JJ222321 27,500 miles (1,550 engine hours)
Kenworth T880 6x4+1 (GVWR Rating 66,000 lbs) Paccar X15 450 HP engine (1650 ft/lbs) with DEF system, Fuller 8LL manual transmission (10-speed), air conditioning, 120 US gal fuel tank, (1)-20,000 pound rated front axles and equip, 425 front tires, 46,000 pound rated Hendrickson tandem rear air ride suspension & equip, includes- air ride driver seat, stationary pass seat, heated and power mirrors, power windows & locks, cruise control, CUP HOLDERS, DOME LIGHT, delay wipers, front tow hook- Cab painted “Gloss White”, all std. equipment (may include some Irving Equipment installed options)
Standard Equipment:
- Hawe proportional control system for placing boom
- (1) Proportional radio remote control handset with proportional control (HBC 2-stick with 2-twist knobs)
- (1) Back-up cable remote (same box as main handset)
- Electric vibrator on concrete hopper grid
- Outrigger level indicators
- (4) Large outrigger pads with handles and storage racks
- Lincoln Auto-lube system on hopper and shifting cylinders (greaser on moving parts on hopper)
- Water tank clean-up water
- 1- Hydraulically driven water wash out pump standard rinse off (435 PSI) unit with screen
- Spare pipe rack on deck
- Washout ball lock-out pin “ball stop” on rear elbow
- Prime port on rear elbow
- Manual open and close hopper clean-out door, (round)
- Rear tow hooks
- (1) Service and Parts guides, paper and CD versions included
- LCD display for all pump cell functions, and trouble-shooting, error logging and system monitoring via CAN-BUS
Options, Included:
- Paint- standard: White (base unit), White (pipe), White (clamps)
- Decals- standard: On boom top/sides/pump sides, cab (similar to customers’ existing unit)
- (1) Aluminum side toolbox installed on truck frame
- Rear fenders and mud flaps
- Extra hydraulic hoses, relays, fittings (over-pack kit), tool kit,
- 75’-0” air hose, blow-out cap, Chicago fitting on truck
For more information contact:
Mark Irving 419-934-1682 mirving@irvingequipment.net